Haygor Instruments
configurator button
(713) 641-1791
Haygor Remanufacture & Repair Preview — Revised Hero
Remanufacture & Repair

Restore critical instrumentation. Without replacement.

Haygor evaluates, repairs, remanufactures, tests, and calibrates industrial instruments—from current product families to hard-to-replace legacy equipment. Start with the nameplate, the failure symptoms, and the application; our team will help define the most practical path back to service.

Request a repair evaluation Browse brands serviced
Current & legacy equipment Evaluation before work Calibration support
Since 1981 Industrial instrument repair experience
Current + Legacy Support for installed and discontinued equipment
Repair + Reman Scope matched to condition and application
Test + Calibrate Performance verification before return
Repair, remanufacture, or replace?

The right answer starts with the equipment—not a catalog assumption.

Replacement is not always the fastest, lowest-risk, or most economical option. An installed instrument may already match the process connection, range, signal, control strategy, and surrounding assembly. Haygor reviews the complete requirement before recommending a service path.

Send the manufacturer and model, clear nameplate photographs, failure symptoms, service conditions, and required turnaround.

Restore proven equipment

Preserve an instrument already matched to the installation when repair or remanufacture is technically and economically practical.

Reduce disruption and lead time

A viable repair can avoid redesign, reconfiguration, installation changes, or the wait associated with a hard-to-source replacement.

Control lifecycle cost

Compare the repair scope with replacement cost, availability, compatibility, documentation needs, and expected service life.

Repair capabilities

Service for the instruments that keep the process moving.

Haygor evaluates a wide range of mechanical, pneumatic, electronic, and filled-system instrumentation. Select a category for more detail or send the model directly for review.

01

Chart Recorders

Strip, circular, and paperless recorders used to capture mechanical or electrical process inputs.

View repair service
02

Process Controllers

Pneumatic and electronic controllers supporting pressure, temperature, flow, level, and process-control loops.

View repair service
03

Pressure & Process Gauges

Pressure, flow-rate, liquid-level, test, sanitary, and other mechanical measurement instruments.

View repair service
04

Differential Gauges

Standard differential-pressure gauges and models incorporating a pressure switch or process indication.

View repair service
05

Electronic Transmitters

Pressure, temperature, level, flow, and electronic-to-pneumatic transmitting and conversion equipment.

View repair service
06

Filled Systems

Pressure and level transmitters, switches, capillaries, seals, and connected filled-system assemblies.

View repair service
07

Honeywell DCS

Evaluation and service support for selected Honeywell distributed-control-system components and hardware.

View repair service
08

Industrial Electronics

Circuit boards, power supplies, assemblies, control hardware, PLC-related components, and supporting electronics.

View repair service
Featured brand directory

Find the manufacturer—or instrument type—you need serviced.

Search the featured directory or filter by application area. Repairability, remanufacture scope, parts availability, calibration, and turnaround depend on the exact model and condition.

12 featured brands shown Do not see the manufacturer? Send the nameplate anyway—Haygor may still be able to evaluate it.

ABB

01

Pressure and temperature transmitters, analytical instrumentation, controllers, and related process-automation equipment.

TransmittersAnalyticsControls
Ask about ABB repair

Ashcroft

02

Industrial, process, differential, sanitary, test, and commercial gauges plus pressure transducers, switches, and temperature instruments.

GaugesSwitchesTransducers
Ask about Ashcroft repair

Barton

03

Differential-pressure instruments, indicators, testers, chart recorders, controllers, and transmitters used in process applications.

Differential pressureRecordersFlow
Ask about Barton repair

Foxboro

04

Process transmitters, controllers, recorders, positioners, and analytical instruments used in demanding industrial environments.

TransmittersPositionersAnalyzers
Ask about Foxboro repair

Honeywell

05

Absolute, differential, and gauge-pressure transmitters plus chart recorders, controllers, and selected DCS hardware.

PressureChart recordersDCS
Ask about Honeywell repair

Rosemount

06

Pressure, temperature, level, and flow instrumentation including transmitters, sensors, and thermowells.

PressureTemperatureLevel
Ask about Rosemount repair

Taylor

07

Electronic and pneumatic transmitters, recorders, and control equipment, including discontinued and legacy instruments.

PneumaticTransmittersLegacy
Ask about Taylor repair

Yokogawa

08

Pressure, temperature, level, and flow transmitters plus paperless recorders, controllers, and measurement instruments.

TransmittersRecordersMeasurement
Ask about Yokogawa repair

Fisher

09

Control valves, positioners, regulators, actuators, and related flow-control equipment for process and utility service.

Control valvesPositionersActuation
Ask about Fisher repair

U.S. Gauge

10

Industrial pressure gauges and mechanical measurement instruments used in process, utility, and equipment applications.

Pressure gaugesMechanicalCalibration
Ask about U.S. Gauge repair

Micro Motion

11

Coriolis mass-flow and density measurement systems, including meters and transmitters for high-accuracy process applications.

CoriolisMass flowDensity
Ask about Micro Motion repair

Siemens

12

Process instrumentation and automation hardware for pressure, temperature, flow, level, control, and plant measurement.

Process instrumentsAutomationMeasurement
Ask about Siemens repair

Brand clarification: Brand names and trademarks belong to their respective owners. A listing identifies equipment Haygor may inspect, repair, remanufacture, calibrate, source parts for, or otherwise evaluate. It does not by itself state or imply that Haygor is an authorized distributor, representative, or service center for every manufacturer, product family, or territory.

Customer-focused repair process

A controlled path from incoming evaluation to return shipment.

Work proceeds against an agreed scope. Haygor evaluates the equipment, communicates findings, completes authorized work, verifies performance, and returns the instrument with the applicable service documentation.

01

Inspect & diagnose

Review the instrument, visible condition, failure symptoms, model details, and surrounding application.

02

Define the scope

Outline the recommended repair or remanufacture work, price, expected timing, and known limitations.

03

Repair or remanufacture

Complete the authorized mechanical, pneumatic, electronic, filled-system, or restoration work.

04

Test & calibrate

Verify function and performance against the agreed service scope and applicable specifications.

05

Return & support

Package the equipment securely, provide applicable documentation, and support return-to-service questions.

Start with the nameplate

Better inputs produce a faster repair evaluation.

Send whatever information is available. The exact model and application help Haygor distinguish a straightforward repair from a remanufacture, calibration, filled-system, replacement, or custom-fabrication requirement.

Manufacturer, model, and serial number
Clear nameplate and connection photos
Range, output, and process connection
Process media, pressure, and temperature
Failure symptoms and prior repair history
Quantity and required return date
Send a repair request Call (713) 641-1791
Frequently asked questions

Repair and remanufacture FAQ

Model-specific answers require an equipment review, but these guidelines explain how to begin.

Does Haygor repair every model from every brand shown?
No. Serviceability depends on the manufacturer, product family, model, age, condition, available components, application, and requested scope. Send the exact model and photographs so Haygor can confirm whether an evaluation is practical.
Can Haygor help with obsolete or discontinued instrumentation?
Often, yes. Depending on the equipment, Haygor may be able to repair or remanufacture the instrument, source components, evaluate a remanufactured unit, identify a practical replacement, or adapt the surrounding assembly.
What is the difference between repair and remanufacture?
A repair generally corrects identified faults and restores required function. A remanufacture may involve a broader teardown, restoration, replacement of wear items, refinishing, reassembly, testing, and calibration. The proposed scope should make clear which path applies.
Can calibration or testing be included?
Yes, where applicable. Include the required range, accuracy, test points, output, documentation, and any governing plant or quality requirements when requesting service.
Does a brand listing mean Haygor represents that manufacturer?
Not necessarily. The directory identifies equipment Haygor may be able to inspect, repair, remanufacture, calibrate, source parts for, or evaluate. Manufacturer authorization and distributor status should be confirmed separately for the exact product family and territory.
What should be included in the initial request?
Include the manufacturer, model, serial number, range, output, connections, condition, failure symptoms, process media, operating pressure and temperature, photographs, quantity, and required timing. Send what you have; the team can identify missing information during review.
Put the instrument in front of the right team

Send the brand, model, condition, and application.

Haygor will help determine whether the practical next step is repair, remanufacture, calibration, replacement review, filled-system work, or another service path.

Request an evaluation